for Turnigy nano-tech 5600mah 2S2P 50~100C Hardcase :
Turnigy nano-tech 5600mah 2S2P 50~100C Hardcase
Spec.
Capacity: 5600mAh
Voltage: 2S2P / 2S Cell / 7.4V
Discharge: 50C Constant / 100C Burst
Weight:294g
Dimensions: 138.5x47x25mm
Balance Plug: JST
Discharge Plug: 4mm Bullet-connector to your own custom plug
Harganya: 500rb
The Turnigy Accucel 6 Balance Charger (READY STOCK = 3Bh)
Spoiler for open this:
Spoiler for open this:
for The Turnigy Accucel 6 Balance Charger:
The Turnigy Accucel 6 Balance Charger
The Turnigy Accucel 6 Balance Charger utilises quality FETs and resistors to accurately balance and charge Lithium Polymer and NiMH batteries.
The Accucel-6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Input Voltage: 11~17v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~6.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 355g
This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, TURNIGY and any pack with a JST-XH adapter.
The Turnigy Accucel 6 Balance Charger
Harganya Rp. 350rb
Just Another Charger 80W 6A 2~6S Balance Charger w/PSU (READY STOCK = 2Bh)
Spoiler for open this:
Spoiler for open this:
for Just Another Charger 80W 6A 2~6S Balance Charger w/PSU:
Just Another Charger 80W 6A 2~6S Balance Charger w/PSU
Spec.
Input Voltage: 11~18v (in-built 100~240V AC to DC power supply)
Circuit power: Max Charge: 80W / Max Discharge: 10W
Charge Current Range: 0.1~6.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 503g
Dimensions: 145x37x135mm
Harganya Rp. 500rb
Charging Harness (READY STOCK = 2Bh)
Spoiler for open this:
Spoiler for open this:
for Dean Charging Harness:
Dean Charging Harness
Suit Most Chargers
Harganya Rp. 45Rb aja
Power Supply / Adaptor 12 Volt 5 Ampere (READY STOCK = 4Bh)
Spoiler for open this:
Spoiler for open this:
for Power Supply / Adaptor 12 Volt 5 Ampere:
Power Supply / Adaptor 12 Volt 5 Ampere
Adaptor 12 Volt 5 Ampere cocok banget dipake buat charger lipo, merk Jefron/Jet buat yg belom kenal sama merk jet, ini adaptor yg biasa bikin OEM adaptor buat laptop, konektor cocok dengan turnigy, gt power buat merek lain belom pernah coba tapi biasanya sama deh Cocok buat charger turnigy / imax / Gt Power
HK15298B High Voltage Coreless Digital MG/BB Servo 66g / 20kg / 0.16s((STOCK = 0Bh))
Spoiler for open this:
Spoiler for open this:
for HK15298B High Voltage Coreless Digital MG/BB Servo 66g / 20kg / 0.16s:
HK15298B High Voltage Coreless Digital MG/BB Servo 66g / 20kg / 0.16s
HK15298B High Voltage Coreless Digital MG/BB Servo
Spec.
Torque: 18kg @ 6v, 20kg @ 7.4v
Weight: 66g
Speed: 0.18 / 60deg @ 6v, 0.16 / 60deg @ 7.4v
Voltage: 4.8v~7.4v
Motor type: Coreless
Plug: JR Style
Features:
Alloy Heatsink
Dual Ball-Raced
Harganya 0
Turnigy 620DMG+HS High Torque Digital Servo (MG) 10.6kg / .13sec / 52g(STOCK = 2Bh)
Spoiler for open this:
Spoiler for open this:
for Turnigy 620DMG+HS High Torque Digital Servo (MG) 10.6kg / .13sec / 52g:
BMS-Turnigy 620DMG+HS High Torque Digital Servo (MG) 10.6kg / .13sec / 52g
Spec
Weight: 52g / 1.84oz
Dimensions: 40.5 x 20 x 42mm / 1.60" x 0.78" x 1.62"
Torque At 6.0V: 10.6kg/cm , 190 oz/in
Speed At 6.0V: 0.13 sec / 60° at no load
Operating voltage: 4.8 - 6.0V
Harganya 250rb
TrackStar 1/18th Scale 12T Brushless power System (5050kv) (STOCK = 2Bh)
Spoiler for open this:
Spoiler for open this:
for TrackStar 1/18th Scale 12T Brushless power System (5050kv):
TrackStar 1/18th Scale 12T Brushless power System (5050kv)
TrackStar performance now in comes in easy to select Combo package!
Using a Fast Silicon Labs MCU and high quality On-Semiconductor MOSFETs the TrackStar 18A ESC sets a new standard in high quality yet affordable car ESCs. With Intelligent MCU logic the TrackStar series ESCs allow extremely precise start up control and positioning feed back from the motor. Combined with the quality 4 pole motor this translates in to very smooth start up and acceleration and torque.
The Turnigy TrackStar 18A ESC also boasts a host of programing options not usually found in an ESC of this size and can be programmed with ease via the Turnigy TrackStar programing card (sold separately)
ESC Specification:
Cont. Current: 18A
Burst Current: 25A
Car Size: 1/18th
Battery: 2-3 Cell Lipo / 4-9 Cell Ni-XX
L-BEC: 5V / 1A Output
Motor Type: Sensorless Brushless
Size: 30 x 26.1 x 13.8mm
Weight: 26g (Including wires)
Motor Plugs: 3.5mm Bullet type
Battery Plug: Required
On/Off Switch: Yes
Reverse: Yes
Motor Specifications:
Turns: 12T
KV value: 5050KV
Poles: 4
Diameter: 21.5mm
Motor length: 37mm
Extend shaft diameter: 2mm
Length of extend shaft: 11±0.5mm
Weight: 60g
No loading @ 7.2V: 2.2A
Max current: 34A
Resistance (Ω): 0.027Ω
Battery range: 2~3s 7.4v~11.1v
Operation Temperature: 80°
Max Temperature 130°
Suitable car scale: 1/18
Suitable ESC: 25A
Thickness of lamination: 0.2X20mm
Harganya Rp. 450rb
Combo ESC Hobbyking X-Car Brushless Power System 4000KV/60A
[spoiler=open this] for Combo ESC Hobbyking X-Car Brushless Power System 4000KV/60A
:
Sebuah sistem brushless sangat kuat untuk mobil, truk 1/10 atau 1/12 skala atau kereta, yang Hobbyking X-Mobil seri menawarkan kinerja tinggi dan nilai yang besar yang mudah untuk menggunakan paket combo. Dengan sistem ini, motor dan ESC yang cocok untuk kinerja terbaik yang menghemat kerumitan untuk memilih komponen yang terpisah sendiri. Cukup solder di konektor favorit Anda, pasang gigi pinion dan Anda siap untuk lari!
12th December 2012
lipo, charger, servo, horn, buzzer, heatsink, combo
Terkait
.jpg)
.jpg)
