Kondisi Barang : Baru
Harga :
Lokasi Seller : Daerah Istimewa Yogyakarta
Description :
jual servo micro mini standard 5gr-10gr-20gr-30gr-50gr nylon gear , plastic gear , metal gear , titanium gear , digital servo , analog servo , turnigy , hxt , hextronic , hitec , futaba , towerpro
Bismillahirrahmanirrahim
Misi min mod nitip lapak..
Micro Servo 5-10gr
[/quote]
Quote:
Hextronic HX 900 - MICRO SERVO
[/spoiler]
Spoiler for open this:
for Hextronic HX 900 - MICRO SERVO:
Spesifikasi:
3 pole ferrite
Nylon gear
Top ball bearing
Operating Voltage: 4.8V~6.0V
Operating speed: 0.12sec/60 degree
Output torque: 1.6kg/cm 4.8V
Harga : Rp.55.000/pcs (beli 5pcs Rp.50.000/pcs)
Status : Call
selengkapnya...
HS-82MG STANDARD MICRO SERVO MOTOR (METAL GEAR)
Spoiler for open this:
for HS-82MG STANDARD MICRO SERVO MOTOR (METAL GEAR):
Spesifikasi:
Metal Gear Applied
Torque 4.8/6.0V (kg.cm) : 2.8 / 3.4 or (38.88 / 47.22oz.in)
Speed 4.8/6.0V (sec/60°): 0.12 / 0.10
Size : 29.8x12.0x29.6mm / (1.17x0.47x1.16in)
Weight : 19.0g / 0.66oz
Harga : Rp.250.000/pcs (beli 5pcs Rp.240.000/pcs)
Status stok: Call
selengkapnya...
Mini Servo 11-20gr
|
Spoiler for open this:
Quote:
Di tunggu gan updetenya 
Standard Servo 31-60gr
|
[quote]
HITEC HS-311 STANDARD SERVO MOTOR (NYLON GEAR)
Spoiler for open this:
for
HITEC HS-311 STANDARD SERVO MOTOR (NYLON GEAR):
Spesifikasi:
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.19sec/60° at no load
Operating Speed (6.0V): 0.15sec/60° at no load
Stall Torque (4.8V): 42 oz/in (3.0 kg/cm)
Stall Torque (6.0V): 49 oz/in (4.5 kg/cm)
Gear Type: Nylon
Weight: 1.52oz (43g?)?
Harga : Rp.135.000/pcs (beli 5pcs Rp.130.000/pcs)
Status stok : Call
selengkapnya...
HX12K SERVO (METAL GEAR) 55G / 10KG
Spoiler for open this:
for
HX12K SERVO (METAL GEAR) 55G / 10KG:
Spesifikasi:
Torque Rate: 10KG
Speed: .16sec/60deg
Input: 5~7v
Type: Digital
Gearing: Metal
Weight: 55g
Size: 40.7 x 19.7 x 42.9mm
Harga : Rp.150.000/pcs (beli 5pcs Rp.143.000/pcs)
Status stok: call
selengkapnya...
TURNIGY METAL GEAR SERVO 60G /15.5KG
Spoiler for open this:
for
TURNIGY METAL GEAR SERVO 60G /15.5KG:
Spesifikasi:
Voltage: 4.8~6.0v
Speed: 0.16~0.14sec
Torque: 15.5~17.0kg/cm
Weight: 60g
Size: 40.7x20.5x39.5mm??
Harga : Rp.210.000/pcs (beli 5pcs Rp.200.000/pcs)
Status stok: call
selengkapnya...
HSR-5498SG (DIGITAL ROBOT SERVO)
[spoiler=open this] for
HSR-5498SG (DIGITAL ROBOT SERVO):
Spesifikasi:
Interface: HMI Protocol, RS-232C Daisy Chain, PWM
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Speed (6.0V): 0.22sec/60° at no load
Operating Speed (7.4V): 0.19sec/60° at no load
Stall Torque (6.0V): 152.76 oz/in. (11kg.cm)
Stall Torque (7.4V): 187.48 oz/in. (13.5kg.cm)
Dimensions: 1.57" x .78"x 1.85" (40 x 20 x 47mm)
Weight: 2.10 oz.. (59.8g)??
Harga : Rp.770.000/pcs (beli 5pcs Rp.750.000/pcs)
Status stok: call
selengkapnya...
Cara pemesanan:
- Order Via SMS 0898 505 7070/PM atau YM
- Tunggu Konfirmasi dari saya akan stok dan harga barang yang anda inginkan
- Setelah anda sepakat dengan harganya
- Silakan transfer uang ke
BCA 8610-180-583
a.n. Andri jeniawan
Rekber juga ok. fee rekber ditanggung pembeli
- Barang akan segera dikirimkan
- Posisi barang ada di Yogyakarta. Pengiriman menggunakan jasa JNE. nanti akan saya post no resinya di sini.
COD Jogja OK Ketemuan di depan Fakultas Teknik UNY