This USB6560T4 is a new 4 axis TB6560 CNC control board with USB input, suitable for controlling max.3A 2 phase stepper motor.
It's easy to operate for CNC DIY, but as it's controlled by USB port, users need more careful with the software install.
2. Features:
1) 4 axis in one unit, easy handling with PC, power supply & motors.
2) 4 decay modes, suitable for 2 phase stepper motor with no more than 3A current.
3) The software designed for this board, can support maximum 8pcs limit switches (Every axis with 2 pcs), much better than Mach3.
4) When connected with manual control box, the board can work off-line, good for coordinate adjusting on tool setting part.
5) 4 current setting: 0.75A, 1.5A, 2.25A, 3.0A.
6) Automatically reducing current on board, when stepper motors were forced to stop, the current on board will be 25% of full current to protect the motor and IC chips.
7) 12V isolated power supply output easy for external application, like cooling fan.
8) Limit port is optical isolated to protect IC, also it's with 12VDC input, easy for connecting with proximity switch.
***NOTE:
This driver board is controlled by USB port, can only use with the CNC software special designed for this board. It can't be used with MACH3, KCAM4 or other CNC softwares.
Users should follow its manual and install the software correctly.
Package content
1 x 4 Axis USB TB6560 CNC Driver Board;
1 x Parallel Cable;
1 x CD (Manual & Software)
Kondisi Baru
ane kasih sis 5 bintang :recsel :recsel :recsel :recsel :recsel
Quote:
Originally Posted by boy_kaskus
(Post 498672128)
Gan, fan processor vaio cs26 sudah diterima dengan baik..
Pelayanan mantap,,, :cendolb
Pesan jumat malam, nyampe senin pagi,
mudah2an tambah sukses jualannya... :cendols
Quote:
Originally Posted by boy_kaskus
(Post 515251431)
Gan, ane udah terima barang for fan processor vaio cs nya...
bungkus rapi dan satu hari langsung nyampe,
fannya baru dan mangstab gan, terima kasih....
recommended seller,
nanti kapan2 ane mau pesan yang lain lagi....
:2thumbup
Quote:
Originally Posted by RadityaPutra
(Post 524946114)
Barang sudah sampai gan, sesuai dengan pesanan ane..
Langsung ane colok ke lapie, alhasil langsung jalan! :addfriends
Sayang gak ada gambarnya, soalnya ane langsung colok tapi camera lewat webcam lapie... jadi gak bisa dilihat :hammers
So? Percaya aja deh sama agan satu ini, dijamin gak nyesel n pasti puas! :D
:recsel :recsel :recsel
RECOMMENDED SELLER
Semoga tambah sukses baik di lapak maupun usaha lainnya :beer:
Quote:
Originally Posted by irvan.expert
(Post 651497604)
lapor gan, barang sudah sampe dengan selamat :iloveindonesia
ane pesen fan vaio seri CS ke agan ini :shakehand2
okeh, makasi banyak ya gan... next time ane borong lagi :ilovekaskus
Quote:
Originally Posted by nostalgia.ieona
(Post 668032084)
fan prosesor sony vaio vgn-cs sudah sampai di medan dalam keadaan sehat sejahtera.
ane cuma bisa kasih tropi,
ente emank :recsel:recsel:recsel:recsel
terima kasih sangat gan..
by : julfan (medan)
Quote:
Originally Posted by gand1
(Post 659270755)
Awalnya ane ragu ama Agan dodollu/milan_adam_faiz. Tp setelah barang nyampe rumah, MAKNYOS DAH!!
Ane indent yg ORI, yg dateng ORI 1000%.
Smg kedepannya si Agan tetap :recsel :recsel :recsel
Bwt TS: Kumpulin testi2 Agan, spy para buyer ga sangsi.
Quote:
Originally Posted by wowoxarc
(Post 663658116)
Makasih gan, baterai nya udah nyampe di bandung dengan selamat. Sore pesen siang ini udah nyampe.