for pict for E3JM:






http://s.kaskus.id/images/4115924_20120308041321.jpg









Specification :

Method Detection : Through Beam

Supply Voltage : 24 to 240 VAC ±10%, 50/60 Hz, 12 to 240 VDC,

Sensing distance = 10m(32.8 ft)

Operation Mode = Light-On/Dark-On, switch selectable

for download catalog :

http://elmecon-mk.com/wp-content/Catalog/E3JM.pdf



for G3NA

for pict for G3NA:






http://s.kaskus.id/images/4115924_20120309025531.jpg









Specification :

Operate Time :

- 1/2 of load power source cycle + 1 ms max. (DC input)

- 3/2 of load power source cycle + 1 ms max. (AC input)

Release Time :

- 1/2 of load power source cycle + 1 ms max. (DC input)

- 3/2 of load power source cycle + 1 ms max. (AC input)

Output On Voltage Drop : 1.6 V (RMS) max.

Leakage Current :

- 5 mA max. (at 100 VAC)

- 10 mA max. (at 200 VAC)

Insulation Resistance : 100 M? min. (at 500 VDC)

Diekectric Strength : 2,500 VAC, 50/60 Hz for 1 min

Vibration Resistance : Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)

Shock Resistance : Destruction: 1,000 m/s2

For catalog download :

http://elmecon-mk.com/wp-content/Catalog/G3NA.pdf



Omron temperature control e5cc-rx2asm-800

for for pict E5CC:




http://cdn-u.kaskus.co.id/80/1qiguksk.jpg









Spek :

- Model temperature control universal dengan harga terjangkau

- Settingan yang sederhana tanpa catu daya dengan menggunakan program CX-Thermo

- Periode pembacaan suhu dengan speed 50ms untuk regulasi cepat dan tepat

- Analog input current : 4-20mA or 0-20mA

Analog input voltage : 1-5V, 0-5V or 0-10v

- Models with temperature inputs

Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II

Platinum resistance thermometer: Pt100 or JPt100

Infrared temperature sensor: 10 to 70°C, 60 to 120°C, 115 to 165°C, or 140 to 260°C

- Other Function :

Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, 40% AT,

100% AT, MV limiter, input digital filter, self tuning, PV input shift, run/stop, protection functions,

extraction of square root, MV change rate limit, temperature status display, moving average of input

value, and display brightness setting



OMRON SOLID STATE TIMER H3CR-A8

for for pict H3CR:




http://www.ia.omron.com/product/thum...mily/l_193.jpg









Spek :

Operating mode : A: ON-delay (power supply start)

B2: Flicker ON start (power supply start)

E: Interval (power supply start

J: One-shot (power supply start)



Time range : 0.05 s to 300 h



Input type: No-input available



Supply voltage:

- 100 to 240 VAC (50/60 Hz)/100 to 125 VDC

- 24 to 48 VAC (50/60 Hz)/12 to 48 VDC



Output : Contac





berminat ???

langsung ke..